JDM Honda Access BB1 BB4 Prelude Front & Rear Parking Sensor Set 4G 92-96

Description

JDM Honda Access BB1 BB4 Prelude Front & Rear Parking Sensor Set 4G 92-96
OEM Honda Access factory optional front and rear parking sensor set with switch and wiring looms, as removed from a BB1 chassis Honda Prelude, years 1992 - 1996.
These use:
- sensor part number 08V66-SP1-0M0-03 & 08V66-SP1-060-B3
- control unit part number 08V67-SL4-0M1-01 & 08V66-SP1-0M0-01
This set comprises of two looms, one for the front and one for the rear of the vehicle. This set suits someone with knowledge of wiring, relays and how to troubleshoot & solve problems.
- The front loom set has an interior and exterior harness. The interior loom plugs into the option ports in the interior fuse box & the switch mounts in the center console. There are two wires which will need to be extended from the interior loom to the exterior loom (yellow wires in brown plugs), these wires are built into Japanese market Preludes but will need to be run on any other market vehicle as far as we are aware.
- The exterior loom has piggy back plugs which connect to the brake master cylinder fluid switch, this is so the front sensors will only function when the switch is on and the parking or e brake is released. There is another wiring plug in the engine bay which this loom connects to with piggy back plugs. There is a relay box to control the parts which usually mounts behind the bumper, the bumper will need to have holes cut or drilled to mount the sensors.
- The rear loom set mounts in the boot or trunk of the vehicle, it has piggy back plugs which connect to one tail light plug on the vehicle, this is to give the unit a reverse signal so the sensors only function when the vehicle is in reverse. There is a relay box and small speaker which mount up under the parcel shelf. The bumper will need to have holes cut or drilled to mount the sensors.
Condition:
Good used condition as pictured, this set was bench tested and all functions are working well. There are some cracks, scratches and marks to the parking sensors as can be seen in photos 6-12.
We are a classic and performance Japanese car dismantler based in New Zealand and send worldwide on a daily basis, all vehicles are posted up on our facebook page JankuYado, so if you are wanting any other parts for this vehicle please let us know, we also have a large variety of parts listed on eBay.
Shipping:
Tracked shipping is offered to most destinations, we send through both NZPost and DHL depending on the item, if you have a preference please let us know.
We combine shipping whenever possible; please ask us for a combined price
The general delivery time for airmail is 2-3 weeks, for courier 1-2 weeks and DHL around 3 days; however sometimes due to customs clearance and other situations outside of our control your package may take slightly longer than this.
Your item(s) will be dispatched within 24 hours of receiving cleared payment.
PLEASE NOTE:
The above is the normal delivery timeframe however due to the current situation and the lack of planes airfreight capacity is significantly delayed by a
MINIMUM
of a week or two but possibly more.
Terms and conditions:
International buyers, please note:
Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.
By placing a bid on this auction, you agree not to reimport this item back into New Zealand after purchase.
Powered by SixBit's eCommerce Solution