Axis 240Q 4-Channel Video Server CCTV IP Network Encoder - Free Shipping

Description

Axis 240Q 4 port encoder. This unit was recently removed from a site when all of the cameras were upgraded to IP, and is in fully functioning condition. All units are tested before shipping. Refunds and returns are not accepted for this item. I have shipped over 500 of these and have not had a single unit fail in transit. IP address and username information was not documented for this encoder, so it is recommended to default all the unit back to factory default settings before using. This can be completed by first powering down the unit. Next press and hold the control button located just above the status LED's with a paper clip. While keeping the button held, apply power to the unit. Continue to hold the control button for 30 seconds after the unit powers on, then release. The blade will now default to an IP address of 192.168.0.90, username of root, and password of pass.
12VDC Power supply will be included with unit.
All documentation for the chassis and blades can be obtained from the Axis website via the links below.
Edit: No more links, because Ebay thinks that is helpful to anybody. You'll have to just Google it.