AMX FG423-84, PS-POE-AT-TC High Power POE Injector

Description

AMX FG423-84 PS-POE-AT-TC High Power POE Injector.
High Power PoE Injector, 802.3AT Compliant
With the high power PS-POE-AT-TC Injector, transmit both power and data through a single cable to a remotely located Power-over-Ethernet (PoE) touch panel. Required for use with the MVP-9000i and DXLink Twisted Pair Transmitters and Receivers, it is also compatible with the MXT-1000, MXD-1000, MXT-700, MXD-700 and MXD-430. This self-contained single-port PoE gigabit power supply "injects" DC power and data into the same twisted pair cable at a distance of up to 100 meters (328 feet).
Common Applications
The PS-POE-AT-TC PoE Injector sends power and data on demand to wall or table docking stations of compatible touch panels via a single Ethernet connection.
Features
10/100/1000 (MbPS) Data Rates
Meets IEEE802.3at requirements
Load Diagnostic LED
100/240 VAC Universal Input
Specifications
Dimensions (HWD)          5 1/2" x 2 1/8" x 1 1/4" (14 cm x 5.3 cm x 3.25 cm)
Weight .44 lbs (200 g)
Environmental
Temperature (Operating):
-4°F to 104°F (-20°C to 40°C) @ 30W
-4°F to 131°F (-20°C to 55°C) @ 22.5W
Temperature (Storage): -4°F to +158°F (-20°C to +70°C)
Relative Humidity (Operating): Maximum 90%, Non-Condensing
Thermal Rating: 20 BTU/hr (@240VAC)
Operating Altitude: -1000 to 10,000 ft. (-304.8 to 3048 m)
General
LEDs:
Yellow (On): power is on and active
Green (On): A remote terminal is connected
Green (Blinking): Overload state or short circuit
Enclosure: Molded black matte plastic
Cord and Connectors: Dual shielded RJ45 jacks built into the enclosure, EIA 568A and 568B
Approvals:
IEEE 802.3at (PoE)
RoHS / WEEE compliant
CE
FCC Part 15, Class B
EN 55022 Class B (Emissions)
EN 55024 (Immunity)
VCCI (Japan)
C-Tick
UL/cUL per IEC 60950-1
GS Mark per IEC 60950-1
Input
LEDs:
Yellow (On): power is on and active
Green (On): A remote terminal is connected
Green (Blinking): Overload state or short circuit
Enclosure: Molded black matte plastic
Cord and Connectors: Dual shielded RJ45 jacks built into the enclosure, EIA 568A and 568B
Approvals:
IEEE 802.3at (PoE)
RoHS / WEEE compliant
CE
FCC Part 15, Class B
EN 55022 Class B (Emissions)
EN 55024 (Immunity)
VCCI (Japan)
C-Tick
UL/cUL per IEC 60950-1
GS Mark per IEC 60950-1
Output
Pass Through Data Rates: 10/100/1000 Mbps
Output Voltage: 55 VDC Nominal
Output Power: 30 Watts (Guaranteed)
Output Current: 0.6A (max)
Ripple and Noise: Below the IEEE802.3af requirements
f<500Hz: Vp-p 0.5
500Hz to 150kKHz: Vp-p 0.2
150KHz to 500KHz: Vp-p 0.15
500KHz to 1MHz: Vp-p 0.1
Transient Response: Meets IEC61000-4-4 (1Kv)
DXLink Transport Layer Throughput: 10.2 Gbps pass thru (only applicable to DXLink signals)
Compatible AMX Products
DX-TX, DXLink™ Multi-Format Transmitter Module (FG1010-310)
DX-TX-DWP, DXLink Multi-Format Decor Style Wallplate Transmitters (US) (FG1010-325-BL/-WH)
DX-TX-WP, DXLink Multi-Format Wallplate Transmitters (FG1010-320-BL/WH)
DX-RX, DXLink HDMI Receiver Module (FG1010-500)
MVP-9000i, 9” Modero® ViewPoint® Touch Panel with Intercom (FG5967-01/02)
FG Numbers       FG423-84